Griffin Armament Announces DUAL-LOK PSR Rifle Suppressors
Reflex Suppressors, or Over the Barrel Suppressors, have been manufactured for quite some time but recently haven’t been the focus of mainstream manufacturers. Griffin first made over-the-barrel suppressors over ten years ago with the introduction of the RSTA and SPR models. Meant to diminish blowback, provide superlative accuracy, excellent POI shift characteristics and add minimal system length, these suppressors were highly desirable among suppressor aficionados. Griffin is reintroducing the next generation over the barrel suppressors with the DUAL-LOK PSR suppressor series. However, before going into detail on these models, a brief discussion on the history of reflex suppressors is warranted.
History of Reflex Suppressors
Unlike an integral suppressor, which typically has drilled holes in the barrel of the host firearm and the tube extending over the barrel, the over-the-barrel suppressor has an attachment system that goes rearward of the barrel’s muzzle by several inches, thus making a shorter overall length suppressed firearm. Despite the long length of the suppressor itself, this allows for a ~9-inch suppressor to be something like only 6.5 inches or so of added length to the barrel. Popular Vietnam War-era suppressors were all over-the-barrel varieties. Fast forward to a more modern time, the company Ops Inc started providing these style suppressors in the early 1990s and later became prolific, integrating its suppressors with the SOF communities MK12 MOD0 and MOD1 firearms. Around the same time, Knights Armament also started engineering similar products. In the early 2000s, AAC and Surefire started manufacturing over-the-barrel suppressors as well for military sales. These suppressors targeted the sniper community.
Semi-automatic and bolt action rifles in the sniper community used over-the-barrel suppressors almost exclusively for some time in both the Army and Marines until about 2010. This was most likely due to accuracy being more consistent in harsh field use with over-the-barrel suppressors vs muzzle mounted variants. Fast forward to today, and over-the-barrel suppressors are still in use by the sniper communities but not very popular with commercial, recreational users due to their more limited versatility. Griffin introduced the RSTA and SPR around 2010. These suppressors were well-liked by the small community of end users who purchased them due to their single-piece muzzle devices, which were much easier to install vs multi-piece mounting systems from companies like OPS inc. Griffin refocused engineering efforts towards more mainstream muzzle-mounted products around 2016 and chose to discontinue those models.
In the last several years, Griffin has been spending considerable research efforts on developing lighter suppressors with better mounting systems and higher-performance baffle technology. The advent of these developments brought about a reason to revisit the over-the-barrel suppressors. Current Griffin ECO-FLOW baffle tech is much more capable of using the volume of space in the large blast chambers of over-the-barrel suppressors. Laser welding technology has also allowed for lightweight, tubeless versions of these suppressors, which historically had a very negative weight impact vs muzzle-mounted suppressors.
DUAL-LOK System
The DUAL-LOK mounting system provides high-performance attachment, greater user confidence, and a more modern feature set. Incorporating it into the over-the-barrel DUAL-LOK PSR series allows for a rigid locking system in an extremely accurate taper interface mount. Rough handling of the firearms muzzle device is not an issue with the PSR cans as there is a redundant support structure that forces alignment to be as exceptional as a brand-new mounting interface regardless of dings and handling abuse common to the sniper field environment. The suppressors feature the patent pending pressure reduction front cap with an integrated flash suppressor for extremely low flash. Blowback is lesser than previous Griffin RSTA and SPR suppressors in part due to the ECO-FLOW baffles as well as the patent-pending end cap, and other internal geometric nuances. These suppressors are ear safe on gas-operated firearms, making them a perfect fit for bolt actions or semi-automatic systems.
“The DUAL-LOK PSR suppressors offer the benefit of over the barrel suppressors for precision rifles with weight penalties similar to lighter muzzle mounted systems. These are the best over the barrel suppressors available in the industry today.”
– Austin, Lead Design Engineer, Griffin Armament
DUAL-LOK PSR Silencer Features
- Patent pending DUAL-LOK wear-free mounting system requires no consumable parts
- Taper lock interface ensures security and accuracy
- ACME thread provides speed of attachment
- Locking ring incorporates 3 anti-rotation teeth to eliminate inadvertent loosening
- 120 effective positions ensure a rock-solid suppressor mount and provide extremely low POI shift
- 17-4 stainless steel & 718 Inconel materials
- Tubeless laser welded design
- Patent pending ECO-FLOW baffle system for reduced blowback
- Patent pending Pressure Reduction Cap with integrated flash hider
- ¾” wrench flats on muzzle devices
- Collar Nitrided black and PVD’d on FDE models for increased surface hardness, corrosion, and wear resistance
- Heat-treated and Cerakoted Black and FDE in a heat-resistant finish
- Warrantied for life with Griffin’s Perpetual Lifetime Warranty
Muzzle devices supported :
- DUAL-LOK PSR muzzle brake
- DUAL-LOK PSR flash suppressor
Thread pitches supported:
- 1/2×28 (5.56mm)
- 5/8×24 (7.62mm)
Key Features: Griffin Armament DUAL-LOK PSR Silencers
DUAL-LOK PSR 5 Specs:
- DIMS: 1.5”x 8.4”
- Weight: 9oz
- Sound pressure Level: 7db (16” 5.56mm Griffin MK1)
- MSRP: 1195.00
DUAL-LOK PSR 7 Specs:
- DIMS: 1.5”x 8.9”
- Weight: 8oz
- Sound pressure Level: 6 (16” 7.62mm AR10)
- MSRP: 1295.00
Jeremy Mallette is co-founder of International Sportsman. An avid hunter and outdoorsman, he has spent more than a decade in the outdoor industry, from hiking and camping to silencers and hunting. His father taught him to shoot at age six, and he received his first firearm at age eight — a 1942 Colt Commando .38 special revolver. He enjoys yearly trips to Kansas for pheasant hunting, spending time with his children at the deer lease, and collecting unique firearms.